Z-Uno - Board for prototyping Z-Wave devices

Manufacturer: Z-Wave.Me

(0)

48.54 $

Availability: 20 pcs.

pcs.

Add to cart

Comparison

Everything you've dreamed of adding to your Z-Wave smart home is now available withZ-Uno!

With this device it is possible to expand your Z-Wave network with various household devices. Now you can make your kettle, coffee maker, and dishwasher smart. Z-Uno is capable of managing 10 RGBW strips at once, which will allow you to avoid purchasing a huge number of modules. Z-Uno will train your Roomba smart vacuum cleaner so you can control it at all times. This compact board can become several sensors at once, which can make it very easy for you to create automatic watering on Z-Wave, especially if you do it in DIY format.

Temperature/soil humidity/light/voltage/distance sensor
Or any other sensor, dry contact sensor or tick counter.
control of multimedia devices
RGBW controller with the ability to connect up to 10 channels
devices for working with 24V motors
Full integration of other buses and protocols into Z-Wave
Control of relays, dimmers, locks, triggering scenes

Z-Wave Plus compatibility
All Z-Wave frequencies
Supports AES-128 encryption
Update via USB and over the air (Z-Wave OTA)
Multi-channel (16 channels)
16 Association Groups
Works with Z-Wave gateways and other Z-Wave devices directly

You can do all this and much more with Z-Uno. Now the only limit is your imagination.

You can connect any sensor Arduino to the Z-Wave network, create a device “for yourself” with your own sketch in the Arduino environment. Z-Uno is easy to use; full use does not require deep knowledge of the Z-Wave protocol; the format of use is DIY (Do It Yourself).

Z-Uno — is an innovative device created by Z-Wave.Me taking into account the latest advances in the Z-Wave world.

Specification:

8 kB flash memory for your code
4 kB RAM available
Z-Wave radio transmitter at speeds of 9.6/40/100 kBit/s
22 general purpose pins
4 ADCs
5 PWM
2 UART
1 USB (serial port)
64 KB EEPROM
1 SPI (master or slave)
4 IR controller, 1 IR with learning capability
1 TRIAC/ZEROX for dimmer control
1 Interrupt pin
2 16 MHz timers or external source
I2C (software)
1-wire (software)
8x6 Button scanner
2 service LEDs, 1 service button
1 user LED
Power type: USB 5 V, external 3 V, external 4-15 V
always on, sleep or FLiRS (Periodically waking up)

Z-Uno is positioned as a DIY device, so there are already interesting sketches and developments for it that you can look athere. The community is starting to actively develop, so stay tuned for updates.