FIBARO Smoke Sensor
- Manufacturer
- FIBARO
Design, pleasing to the eye
Smoke detectors are usually installed in visible places, such as ceilings. That is why FIBARO designers paid a lot of attention to its design and were able to combine beauty and the most advanced technologies in one device to protect your home and loved ones.
Minimalist design Smooth lines, smooth surface, small size - all this makes the FIBARO smoke sensor the most beautiful of all competitors
Sound and visual siren
The FIBARO smoke sensor will inform you about detected smoke using the sound siren and RGB LED built inside and also send a signal to the controller |
Polished grille
The grille not only looks great, but also allows you to detect even the smallest amount of smoke |
Incredibly compact
The FIBARO Smoke Sensor is the smallest wireless smoke sensor in the world.
Flawless perfection
These are the words that describe the FIBARO Smoke Sensor grille. At first glance it may seem like a shiny decoration, but in fact it is one of the most important components of the device. The grille's perforation allows smoke to penetrate inside the sensor. The better this is done, the less smoke is required to detect a threat.
The grille is made of the best quality materials and contains a huge number of holes. All this allows the FIBARO Smoke Sensor to instantly detect a threat and reliably ensure home security.
Not only the smoke sensor
Some materials can burn without producing smoke. This is why the FIBARO Smoke Sensor includes additional protection in the form of a temperature sensor. If such materials burn, if the amount of smoke is insufficient to trigger an alarm, the FIBARO Smoke Sensor will still be able to detect the threat. If the FIBARO Smoke Sensor detects a rapid change in temperature caused by a fire, or an increase in temperature up to 54 degrees Celsius, it will notify family members. Only this sensor provides high efficiency no matter what is on.
One sensor - many possibilities
When designing the sensor, FIBARO engineers did everything possible to provide for any scenarios for using the sensor FIBARO Smoke Sensor. As a result, you can install your FIBARO Smoke Sensor wherever you need it, regardless of whether you can connect it to a constant power source, whether the walls allow wireless communication, or whether you have a security alarm system installed. The FIBARO Smoke Sensor can satisfy all needs.
 |
 |
 |
Battery or power supply
You can connect the sensor to a 12/24V DC power supply or use an internal battery, which will allow the sensor to operate for about 3 years at standard settings.
|
Integration into security systems
The sensor can be used in conjunction with security systems installed in your home. |
Wired and wireless
The sensor can transmit an alarm signal via wire or wirelessly. |
It's up to you
Your smart home will help you protect your family and property. You decide what actions the smart home should take in the event of a fire, flood or break-in. For example, if a fire is detected by a smoke sensor, the smart home will be able to open the garage, open the blinds, close the windows and highlight a safe escape route. You will also be able to run any safety-related scenario that performs all rescue actions at the touch of a button on your mobile phone or tablet.
Sensitivity calibration
The FIBARO Smoke Sensor offers advanced options for setting response sensitivity. The sensitivity of each sensor may vary depending on where it is installed. For example, in the kitchen, a sensor that is too sensitive can trigger an alarm when you are simply frying meat. Therefore, smoke detectors in the kitchen should be less sensitive. In other rooms where the presence of smoke is not normal, the detector should be set to the maximum sensitivity level. All this will avoid false alarms and provide better protection.
High heat resistance
The thermal insulation material used in the FIBARO smoke sensor housing protects the sensor from damage even at 200 degrees Celsius.
Regular connection check
Correct operation of the sensor is extremely important. Therefore, the FIBARO Home Center 2 controller polls the sensor every hour and checks whether it is working properly. If the controller suddenly detects problems with the connection or operation of the sensor, it will immediately notify you so that you can react in a timely manner.
report!
communications with neighboring devices...
Everything is fine!
Next check in an hour.
Tamper Proof
The smoke detector is an extremely important element of the security system, so any interference with its operation is unacceptable. That's why the FIBARO Smoke Sensor has built-in protection against unauthorized access. Any tampering with the device, power outage, attempt to disassemble or steal it will be detected, and you will be immediately notified about it.
Built-in Z-Wave network tester
The LED in the sensor housing can be used to test the Z-Wave signal strength at the sensor location. High-quality communication between the sensor and the controller is the basis of a well-functioning smart home.
The FIBARO Smoke Sensor can communicate with the controller directly or through other devices on the same Z-Wave network if the signal strength at the sensor location is too weak to establish a direct connection between the sensor and the controller.
Built-in self-diagnosis
The FIBARO Smoke Sensor not only tests the quality of the Z-Wave network, but also performs self-diagnosis to promptly inform the controller about possible operational problems.
Self-diagnosis is performed automatically every 5 seconds. But you can also run it manually. All you need to do to do this is press and hold the button located in the center of the case.
Color information
The FIBARO Smoke Sensor will notify you of its status using a built-in LED. A green LED means the sensor is working properly and you are safe.
You cook, the sensor keeps you safe
The FIBARO Smoke Sensor is a must-have guest in your kitchen. Every time you cook a dish, it checks to see if you forgot to turn off the heat or take out the roast from the oven. You will always be notified in a timely manner about the threat of fire or burnt meat.
Protector of your home
The safety of smart home residents is one of FIBARO's main priorities. That's why FIBARO devices are designed from the ground up to not only provide comfort, but also to make sure your family and belongings are safe.
FIBARO smoke sensor is another FIBARO sensor after leakage sensor and door/window opening sensor, which works to improve life safety.
Detection of the slightest amount of smoke will instantly turn off iron
Smoke change history is shown in the graph
The FIBARO Home Center 2 controller continuously records information about house level and temperature. Whether you have an alarm installed or not, now you can always look at a visual graph and detect even small amounts of cigarette smoke.
Alarm history
Each alarm trigger is recorded and stored in the sensor and controller memory. The trigger history can be constantly monitored from a smartphone, tablet, or computer.
Automatic software updates
The FIBARO Smoke Sensor updates its software completely automatically. Immediately after a software update containing new features or performance improvements appears, the sensor will offer to download it and automatically install it without wasting your time.
Video
Technical specifications
- Operating frequency: 869.0 MHz (officially approved frequency in the Russian Federation)
- Power type: 1 x CR123A battery, 12 V or 24 V
- Operating temperature: -20°C ... +200°C
- Dimensions: 65 x 65 x 28 mm
| Article number | FIB_FGSD-002 |
| Manufacturer | FIBARO |