Philio leakage sensor
- Manufacturer
- Philio
Purpose
The Philio Flood Sensor consists of three sensor sensors:
- leakage sensor,
- humidity,
- temperature sensors.
The Flood Sensor can be used to monitor the water level in irrigation tanks. When the water level drops, the sensor will notify the controller. Also used as indoor flood detection device.
- runs on a 5th generation chip;
- supports Z-Wave Plus, encryption AES-128;
- Temperature measurement range: -10°C to 40°C;
- Temperature accuracy ± 0.4°C;
- Humidity measuring range: 0°C to 80°C;
- Humidity accuracy ± 4%
- Over The Air (OTA) firmware update;
The Philio leak sensor operates autonomously on battery power for about 2 years with standard settings. When the battery level is low, the device sends alerts via the Z-Wave network.
|
869 MHz |
|
28 × 96 × 23 |
|
IP 20 |
|
-10 ... +40 °C |
|
1 × CR123A |
| Article number | PHI_PAT02-C |
| Manufacturer | Philio |