Electromechanical lock PERCo LC72.3

The electromechanical lock PERCo LC72.3 is designed to be embedded in a non-metallic light or medium door with a thickness of 38~50 mm. It is included in the ACS as a normally closed actuator: it remains locked when the power is turned off.

Specifications:

• The center—to-center distance is 72 mm.
• Deadbolt reach: 11 mm in daytime mode, 18.5 mm in night mode.
• The secrecy mechanism is a pin cylinder.
• The failure time is 200,000 passes.

The lock is unlocked with a key or by applying a control voltage to the lock terminals (potential mode of the ACS controller). When connecting the lock to the controller, the manufacturer recommends installing a BZW06-15B, P6KE16CA or its equivalent stablemate on the terminals of the contact group. To control the lock correctly, you need a door position sensor (reed switch is available separately) connected to the controller.

Features:

• Closing the door without a voltage signal from the controller to the lock, by slamming the door.
• Mechanical lock mode switch.
• The control cable is connected to the door leaf.
• Installation on the door with both left and right hinges.

The body parts and locking bar of the lock are protected by a corrosion-resistant coating. No maintenance work is required throughout the lock's operation. The operating temperature range is +1 ° C... +40 °C. Power supply is 12 V DC (PSU is not included). Power consumption — up to 120 mA, up to 2 Watts. Dimensions — 105×20 × 150 mm, weight — not more than 0.5 kg.

Standard equipment:

• Castle.
• The locking bar.
• Screws 3.5×25 DIN7982 — 4 pcs.
• User manual.
• The markup template.
• Packing box.

Not included in the standard package:

• A secret mechanism with a set of keys.
• Handles.
• Decorative linings and fasteners.
• The control cable.