Electromechanical lock PERCo LBP85.1

The electromechanical lock PERCo LBP85.1 is designed for embedding in a light or medium door made of aluminum profile. It is included in the ACS as a normally closed actuating device: in the absence of voltage, it remains locked, and the turn of the turntable is blocked.

Specifications:

• The center—to-center distance is 85 mm.
• The bolt's reach is 14 mm.
• The door mass is 30 mm.
• The secrecy mechanism is a pin cylinder.
• The failure time is 200,000 passes.

The lock is unlocked with a key or by applying a voltage controller signal to the terminals (potential mode of operation of the ACS controller), when de-energized: from the outside with a key, from the inside with a lamb. When connected to the PERCo CT/L04, CL05.1 or CL201.1 controllers, a reed switch is not needed, its functions are assumed by the lock contact group.

Features:

• Automatic operation of the mechanism when the door is closed.
• Supply of the control cable through the locking bar in the door frame.
• Installation on the left and right doors.

When ordering the lock, you need to select the type of locking strip corresponding to the door profile — PERCo-BP1 or PERCo-BP2.

The PERCo LBP85 case.1 is protected by an anti-corrosion coating, the deadbolt, the front and locking bars are made of stainless steel. Tamper resistance and strength correspond to Class I according to GOST 5089-2011, burglary resistance is normal according to GOST R 51241-2008. No lubrication or maintenance work is required.

The operating temperature range is +1 ° C... +40 °C. Power supply is 12 V DC (without PSU included). Power consumption is up to 120 mA, up to 2 watts. Size — 46×25×210 mm, weight — not more than 0.5 kg.

Standard equipment:

• Castle.
• Locking bar with contact group (assembled).
• Mounting kit for installing the lock and locking bar.
• Templates for installing the lock and locking bar.
• Passport and instruction manual.

Not included in the standard package:

• A secret mechanism with a set of keys.
• Handles.
• Decorative linings and fasteners.
• Magnetic door sensor (reed switch).
• Door control and sensor cables.