Z-Uno is a board for prototyping Z-Wave devices

Manufacturer: Z-Wave.Me

(0)

$46.81

Availability: 26 pcs.

pcs.

Into a basket

Comparison

Everything you've dreamed of adding to a Z-Wave smart home is now available with Z-Uno!

With this device, it is possible to expand your Z-Wave network with various household devices. Now you can make a kettle, coffee maker, and dishwasher smart. Z-Uno is capable of managing 10 RGBW tapes at once, which will avoid the purchase of a huge number of modules. Z-Uno will train a smart Roomba vacuum cleaner, and you can operate it at all times. This compact board can become several sensors at once, which can make it much easier for you to create automatic watering on Z-Wave, especially if you do it in a DIY format.

Temperature/soil moisture/Light/voltage/Distance sensor
Or any other sensor, dry contact sensor or tick counter.
multimedia device management
RGBW controller with the ability to connect up to 10 channels
devices for working with 24 V motors
Full integration of other buses and protocols into Z-Wave
Relay control, dimmers, locks, scene triggering

Z-Wave Plus compatibility
All Z-Wave frequencies
AES-128 encryption support
USB and Radio updates (Z-Wave OTA)
Multi-channel (16 channels)
16 Groups of associations
Works with Z-Wave gateways and other Z-Wave devices directly

You can do all this and more with Z-Uno. Now the limit is only your imagination.

You can connect any Arduino sensor to the Z-Wave network, create a device "for yourself" with your own sketch in the Arduino environment. Z-Uno is easy to use, no deep knowledge of the Z-Wave protocol is needed for full use, the format of use is DIY (Do It Yourself).

Z-Uno — This is an innovative device created by Z-Wave.Me, taking into account the latest achievements in the world of Z-Wave.

Specification:

8 kB flash memory for your code
4 kB RAM is available
Z-Wave radio transmitter at high speeds 9.6/40/100 kBit/s
22 general purpose terminals
4 ADCs
5 PWM
2 UART
1 USB (serial port)
64 kB EEPROM
1 SPI (master or slave)
4 IR controllers, 1 x learning capability
1 TRIAC/ZEROX for dimmer control
1 Pin for interrupt handling
2 16 MHz timers or an external source
I2C (software)
1-wire (software)
8x6 Button Scanner
2 service LEDs, 1 service button
1 Custom LED
Power Type: USB 5V, External 3V, External 4-15V
always working, sleeping, or FLiRS (Periodically waking up)

The Z-Uno is positioned as a DIY device, so there are already interesting sketches and developments for it that you can watch. here. The community is starting to actively develop, so stay tuned.