Esmart Reader OEM

The Esmart Reader OEM reader is a board without a housing (module) with the ability to connect an external antenna, designed for installation in ACS (turnstiles, intercoms, etc.), where installation is required while maintaining the appearance of the original device.

It supports identification using HF (13.56 MHz) standard cards, obtaining an individual UID (user ID) number, and transport applications for cities in the Russian Federation and around the world. The protocol for transmitting data to the access controller is OSDP, the interface is Wiegand.

Supports identification for ACS by mobile phone: "hands—free" mode — a reading distance of up to 10 m, with an Android and iOS smartphone via BLE*, "lean like a card" mode - a reading distance of up to 10 cm, with an NFC phone** in HCE mode***, working as a contactless maps.

A secure mode is provided using authentication technologies and information protection from copying.:

• AES key authorization for Mifare Plus cards (SL3 mode).
• Crupto1 key authorization for Mifare Classic, Mifare Plus, and ID cards (SL1 mode).
• Verification of the CMAC signature of the data.
• Esmart® Mobile Application Protection Technology Access.

Security is represented by several ways to protect against replay attacks, signal interception, hacking, and card cloning using cryptographic protection: encryption key diversification, AES 128 encryption when exchanging data between the reader and the identifier, and CMAC signature of the identifier.

Setting up the reader: using a special configuration card — by leaning the Bluetooth Configurator against the device or the Esmart® application. An individual Master card (all information is protected by the manufacturer's privacy program) for entering the configuration mode is included in the package.

User Settings:

• The types of supported identifiers and the basic information associated with them.
• The connection interface is Wiegand 34, Wiegand 58 or Wiegand 66.
• The format and order of the data to be output in Wiegand.
• Working with an external antenna.
• Setting the trigger distance via the mobile app.
• Reset the settings to factory settings.
• LED is a multi-color LED display.

Terminal blocks are provided for connection to the controller and an external antenna, and an audible readout indication. The operating temperature range is -40 °C... +85 °C. The power supply is DC 5~16 V, the power consumption is 100 mA at 12 V. Size — 91×62×8 mm, weight — 22 g.

Standard equipment:

• The Esmart Reader is an OEM reader.
• The master card with the configuration.
• A hex key.
• Template and hardware for installation.

Notes:

*BLE — Bluetooth with low power consumption.
** NFC is a wireless communication technology; the device acts as a pass card.
*** HCE — Host Card Emulation, host card emulation, virtual software identification.