Smartec ST-NC441 Network Controller

The Smartec ST-NC441 network controller is designed for four doors or two turnstiles, four readers with Wiegand 26 and Wiegand 34 interfaces or a custom Wiegand 26-64. Supports identification by card, code, card and code, card or code.

Specifications:

• The number of users is 100,000.
• The number of events is 100,000.
• The number of time zones is 256.
• The number of access levels is 5,000.

The controller is freely configurable, with arbitrary binding of readers to inputs and arbitrary assignment of ports to peripheral devices — a lock relay, reed switch, exit button. Timex software is provided for the controller configuration.

Functionality:

• Control of NC and NO locks.
• Support modes: Antipassback, Gateway, Elevator access.
• Access to the web interface to configure the MAC address, IP address, gateway, subnet mask, server IP address, controller port, and server port.
• Work offline while maintaining full functionality without a permanent connection to the server.
• Restoring factory settings.

A built-in Li-Ion rechargeable battery is provided for the backup power supply system. The controller is equipped with indicators of operating status, internal errors, built-in battery charge, data exchange with RAM, data exchange with Flash memory, data reception from Wiegand, voltage at the reader ports, relay status, input status.

The ST-NC441 is equipped with two repeater-mode Ethernet ports for connecting other controllers and simplifying installation, and freely programmable inputs/outputs (12/6). Six relay outputs are designed to control locks or other devices such as doorbells, lamps, etc. It is supplied without a case. The operating temperature range is 0 ° C... +55 °C. Power supply — DC 12 V. The power consumption excluding readers is no more than 650 mA. The size is 180×120×25 mm.