PERCo CL05.2 Lock Controller

The PERCo CL05 lock controller.2 is designed to work as an element of the PERCo Web, PERCo S-20 and PERCo S-20 School ACS. It is equipped with a reader of contactless cards and keyfobs in EM-Marine and HID formats. Controls an electromechanical or electromagnetic lock. It supports the functions of global zoning control, commission management, and verification.

Memory allocation capabilities:

• 50,000 maps and 230,000 events (default).
• 40,000 maps and 390,000 events.
• 30,000 maps and 550,000 events.
• 20,000 maps and 710,000 events.
• 10,000 maps and 870,000 events.

When working with electromechanical locks of the PERCo LB (PERCo LBP) series, the use of a reed switch is not required, its functions are assumed by the contact group of the lock.

Functionality:

• Lock control: remote control ("Exit"), access card, computer via Ethernet during software installation, Fire Alarm emergency release device.
• Card code reading range: for EM-Marine — 7~8 cm, for HID — 4~5 cm.
• Working with cards with a code of no more than 64 bits.
• Selecting the operating mode of the access card or the system software.
• Management and configuration via the built-in web interface or via the local or network software installed on the PC.

An additional pin is used to connect a reed switch, a light or sound alarm sounder, as a Fire Alarm input or a synchronization channel. When the device is supplied, the network IP address, MAC address, gateway IP address, and subnet mask are set.

The controller supports:

• TCP/IP protocol stack — TCP, UDP, DHCP, ARP, IP, ICMP.
• Communication with the server via Ethernet.
• The application layer of the PERCo Web and PERCo S-20 exchange protocol.
• Access control modes: "Open", "Control", "Closed", "Security".
• An audible indication of the access card.
• Arming and disarming the actuating device.
• Transmitting alarm signals to the central security control panel.
• The work of two CL05S.2 for a two-way point of passage (with a change of zoning).

PERCo CL05.2 is equipped with a piezoceramic sound emitter, a non-volatile RTC timer, an RJ-45 network port and three LED operating mode indicators. The compound used to fill the board provides protection from external damage. The protection of the housing from dust and moisture complies with the IP54 standard. The operating temperature range is +1 ° C... +40 °C. Power supply is 12 V DC (adapter is not included). Additionally, the package includes a metal base, a 15~18V suppressor and a mounting kit. Power consumption is up to 150 mA (2 Watts). The size is 145×50× 20 mm, the weight is not more than 300 g.