PERCo CT/L14 Controller

The PERCo CT/L14 controller is designed for use in the PERCo Web ACS and in the PERCo S-20 system (PERCo S-20 "School"). It acts as a server in the organization of ACS with up to 10 controllers connected due to a limited version of the PERCo Web software loaded into memory (limit — up to 500 employees, up to 500 visitors, up to 100 divisions, up to 1 million). A larger system will require installing the software on a separate server and purchasing the full version of PERCo Web and the PERCo S-20 kit.

The controller supports pulse and potential modes of operation of the control unit. Depending on the configuration set by the user, it manages:

• Four electromagnetic or electromechanical locks when controlling the 2-way passage.
• Two turnstiles or doors.
• Two automatic gate drives or lifting gates.
• With one turnstile and two locks when controlling the 2-way passage.
• Turnstiles, doors, or barriers in combination with locks; the number of IU is no more than three.

The controller supports the gateway mode, which consists of two access points — through or in both directions, depending on the specified access algorithm.

Gateway Configuration:

• Two double-sided locks.
• Lock and turnstile.
• Two turnstiles.
• Full-height rotary turnstile.

The CT/L14 is equipped with four relay outputs, three "open collector" type outputs, 13 inputs with "dry contact" type outputs, six remote control inputs and six remote control indication outputs.

Connection is provided:

• Eight PERCo readers over RS-485.
• Four Wiegand interface readers (with PERCo AC-03 interface converter) or eight Wiegand readers (with four PERCo AC-02.1 interface converters).
• Four remote control buttons for the lock. /li>
• Four reed switches.
• There are four PASS-turnstile exits.
• Two external verification devices — card readers, breathalyzers, etc.
• Two display units with a PERCo AI01 IR receiver with receiving commands from the PERCo AU01 IR remote control for remote control of locks.
• Fire Alarm passageway emergency opening devices.
• The PERCo AU05 system time display via RS-485.
• Ten devices that supply control signals to additional inputs.

The capacity of the built—in non-volatile memory is up to 50,000 users, up to 150,000 events.

Functionality:

• Assigning access rights, configuration, and device management via the controller's Web interface.
• TCP/IP protocol stack support (ARP, ICMP, IP, UDP, TCP, DHCP).
• Arming and disarming the IU.
• Network connection and software update via Ethernet.
• Support for commission management, verification (available when installing network software modules), and zone control functions.
• Sending alarm notifications to a centralized security control panel.
• Connection of sound and light sounders.

The CT/L14 is equipped with an RTC timer and an autopsy sensor, and comes in a metal case. The operating temperature range is +1 ° C... +40 °C. Power supply — 12 ± 1.2 V DC (power supply is not included). Power consumption is up to 250 mA (3 Watts). Size — 208×235×45 mm, weight — up to 1.8 kg.